Large capacity water pumps for municipal water and wastewater, industrial wastewater treatment and food processing
All parts except the casing suction cover and impeller are completely interchangeable within a given frame group. Seven pump sizes are built on four power frames. Maximum interchangeability helps reduce stock holding and assists with maintenance planning.
Back Pull-out Design
The complete rotating element can be removed from the pump without disturbing the suction or discharge piping. Fewer crafts are required to service the pump.
The impeller and shaft are designed with a taper to allow for ease of maintenance and great reliability.
A well-contoured nut is provided which helps to prevent material from hanging up. A set-screw locks the nut in place.
Either clockwise or counter-clockwise rotation can be supplied. The discharge nozzle can be arranged in any one of five positions for either rotation to suit the piping arrangement.
Engineered for Dependability
Constructed with two-vane non-clog impellers with smooth flow passages capable of passing large soft solids.
Maximum Shaft and Bearing Life
Large diameter shafts minimise deflection and increase packing life.
Bearings are selected in accordance with the Anti-Friction Bearing Manufacturers Association (AFBMA) to provide for maximum life expectancy.
Simple Impeller Adjustment
Axial clearance between the impeller and suction cover is controlled by adding or removing shims between the outboard bearing cartridge and the frame.
High Operating Efficiency
Optional with replaceable alloy impeller wear ring and suction cover wear plate.
Manufactured to NOSA (Occupational Health and Safety) specifications.
Available for all sizes